big_wasa
|
| posted on 28/10/05 at 04:57 PM |
|
|
Bell housing Morgan, Ford Zetec, Westfield, Escort
May be of use ?
link
|
|
|
|
|
GeoffT
|
| posted on 28/10/05 at 07:27 PM |
|
|
I must be missing the point somewhere, but I thought a type 9 bolted straight up to a Zetec? I'm sure someone will correct me if I'm
wrong.....!
|
|
|
Big Stu
|
| posted on 28/10/05 at 08:04 PM |
|
|
The standard bell housing does fit, but you have to fit filler plates and there are a few holes that you cannot use. But if you have got 50quid to
spend then it's a good buy.
|
|
|
dave1888
|
| posted on 28/10/05 at 08:26 PM |
|
|
These b/h are for mt75 boxes so it says
|
|
|
big_wasa
|
| posted on 28/10/05 at 08:53 PM |
|
|
The mt75 is an integeral bell housing ,if you read the questions at bottom then it says type 9 ?
|
|
|
givemethebighammer
|
| posted on 31/10/05 at 09:15 PM |
|
|
I looked into this this is the bellhousing to fit a custom MCT75/MT75 gearbox made by Mitchell Cotts to a zetec engine.
see here
http://www.locostbuilders.co.uk/viewthread.php?tid=33362
|
|
|
