Danozeman
|
| posted on 5/4/06 at 05:41 AM |
|
|
Unfinished Mk Indy
Good and cheap zetec indy.
ebay
linky
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
|
|
ned
|
| posted on 5/4/06 at 07:18 AM |
|
|
quote:
Originally posted by Danozeman
Good and cheap zetec indy.
Sorry,
but i don't think its that cheap when you look at the cost of a new starter kit - it was cheap when it was at £500 but not worth it now. It will
go up again before the end without doubt and will not be a bargain for anyone imho.
Ned.
beware, I've got yellow skin
|
|
|
bob
|
| posted on 5/4/06 at 08:38 AM |
|
|
Its a base kit which is about £1500 so with the other parts and another donor and bits to sell a grand would be a fair deal.
|
|
|
Danozeman
|
| posted on 5/4/06 at 10:17 AM |
|
|
quote:
Its a base kit which is about £1500 so with the other parts and another donor and bits to sell a grand would be a fair deal.
Thats what i thought,. With the engine and carbs aswell.
Just noticed this..
quote:
The Sierra Is registered with the zetec engine,
[Edited on 5/4/06 by Danozeman]
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
bob
|
| posted on 5/4/06 at 11:43 AM |
|
|
I'm not sure there are carbs,it just reads inlet manifold.
No shocks or tank side panels rear panel bonnet,still a bit to do.
|
|
|
Pezza
|
| posted on 5/4/06 at 04:24 PM |
|
|
been speaking to the bloke as I was interested, he has a load of other bits to go with it too he's chucking in.
|
|
|
bob
|
| posted on 5/4/06 at 07:01 PM |
|
|
well done pezza, enjoy 
|
|
|
Pezza
|
| posted on 5/4/06 at 09:29 PM |
|
|
cheers, happy with that price tbh, saves me 500 on the basic kit price and i'm sure I can get something for the engine as i'm going bike
route.
|
|
|
bob
|
| posted on 6/4/06 at 06:14 PM |
|
|
Yep nice deal and you would have had to drive to worksop to collect a new kit anyway so its only a few more miles,well actually a fair few but what
the hell its a deal.
Engine and box combo should sell easy on here as well as the sierra parts, what else was in the package ? as it seems the seller didnt list
everything.
[Edited on 6/4/06 by bob]
|
|
|
Pezza
|
| posted on 17/4/06 at 09:05 PM |
|
|
Picked it up yesterday and managed to get it home in one piece on the roof rack lol.
Built it back up to rolling chassis again as is awaiting it's move to the garage (once I finish clearing it out.
The chap had a load of bits to go with it, a selection of 5 master cylinders and resevoirs, pedals, calipers, nuts, bolts, p-clips, handbrake and
clutch cables, another load of gubbins off various donor cars.
Got him down to 970 as he didn't have time to strip the drums off the sierra.
Chuffed with what I got for that price tbh, saved me a fair old whack over the starter kit price, and a good bit of time as it's already at
rolling chassis stage!
Going to run all the brake lines tomorrow evening, found some sheet ally to make up back pannel and trans tunnels kicking around on a job for nowt too
Just need to get on to MK and sort the extra chassis rail and brackets required for a bike engine install, I'll get some pics in the next day or
two of my progress!
Ben
|
|
|
