ned
|
| posted on 9/7/06 at 05:44 PM |
|
|
Few bits on ebay
Sierra stalks, front and rear calipers, xe piston rings, stem seals and manifold, few pug bits aswell and the capri wheels finish in a couple of hours
too...
etdwm 
oops link might help DOH
http://search.ebay.co.uk/_W0QQsassZned.cQQhtZ-1
[Edited on 9/7/06 by ned]
beware, I've got yellow skin
|
|
|
|
|
theconrodkid
|
| posted on 9/7/06 at 06:14 PM |
|
|
you got brackets rear calipers go on ned?if so ill be interested
who cares who wins
pass the pork pies
|
|
|
ned
|
| posted on 9/7/06 at 06:50 PM |
|
|
nope, no caliper carriers, just the calipers as listed i'm afraid..
beware, I've got yellow skin
|
|
|
nige
|
| posted on 9/7/06 at 07:37 PM |
|
|
manifold
im interested in the manifold
are you attending any shows
eg donnington
when you start this journey
you think it will be done in " no " time but then " no " turns into a " bloody " long time
|
|
|
theconrodkid
|
| posted on 9/7/06 at 08:30 PM |
|
|
ooooooooooooh cheers rob,ps hope you are still looking after my baby,see you at uxbridge next sunday?
who cares who wins
pass the pork pies
|
|
|
ned
|
| posted on 9/7/06 at 08:36 PM |
|
|
i might be at donington (when is it?) but to be honest I'm trying to clear some space and would rather get rid of the stuff sooner!
Ned.
ps john/rob caliper carriers look like this, have a pin/bolt with smal rubber boot on aswell.
http://www.locostbuilders.co.uk/upload/IMG_1819b.jpg
http://www.locostbuilders.co.uk/upload/IMG_1816b.jpg
[Edited on 9/7/06 by ned]
beware, I've got yellow skin
|
|
|
ned
|
| posted on 10/7/06 at 07:00 AM |
|
|
I'll measure the calipers tonight and post up the dimensions...
Ned.
beware, I've got yellow skin
|
|
|
ned
|
| posted on 10/7/06 at 09:34 PM |
|
|
John/Rob spacing for caliper guide bolts is approx 118-120mm.
Ned.
beware, I've got yellow skin
|
|
|
