Schrodinger
|
| posted on 18/1/07 at 08:27 AM |
|
|
Body Moulds
I've just come across this on fleabay
http://cgi.ebay.co.uk/MOULDS-FOR-COMPONENTS-SUITABLE-FOR-LOTUS-7-TYPE-CARS_W0QQitemZ330073298947QQihZ014QQcategoryZ29750QQssPageNameZWDVWQQrdZ1QQcmdZV
iewItem
|
|
|
|
|
UncleFista
|
| posted on 18/1/07 at 10:50 AM |
|
|
Link
Tony Bond / UncleFista
Love is like a snowmobile, speeding across the frozen tundra.
Which suddenly flips, pinning you underneath.
At night the ice-weasels come...
|
|
|
andylancaster3000
|
| posted on 18/1/07 at 10:56 AM |
|
|
Damn...more interest now!  
[Edited on 18/1/07 by andylancaster3000]
|
|
|
Humbug
|
| posted on 18/1/07 at 11:00 AM |
|
|
Ah... the same ones I posted about last week 
http://www.locostbuilders.co.uk/viewthread.php?tid=58270
|
|
|
emsfactory
|
| posted on 18/1/07 at 11:21 AM |
|
|
Yep. If these came up a month ago I wouldn't be half way through my set.
|
|
|
macnab
|
| posted on 18/1/07 at 12:23 PM |
|
|
How could those cost $7,500 to make…
|
|
|
Peteff
|
| posted on 18/1/07 at 01:21 PM |
|
|
How could those cost $7,500 to make…
If you use a professional pattern maker to make your buck then take moulds from it the cost would be easily reached. There's a place near me who
make whole building sections like dormers etc. from fibreglass and their moulds are like artwork.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
PAUL FISHER
|
| posted on 18/1/07 at 01:41 PM |
|
|
I think $7500 is a bit over the top for a nose cone mould and 4 wheel arches,but they are about £3500,for a full set,including bonnet rear tub
etc,they don't last forever though,MK have there moulds renewed every couple of years.
|
|
|
