theconrodkid
|
| posted on 26/9/07 at 06:46 PM |
|
|
alloy tube for manifolds
just been having a clear out at werk,we have some allot tube that may be ok for bike t/b or carbs,anyone got internal diameters and ill have a measure
up and grab some
who cares who wins
pass the pork pies
|
|
|
|
|
jacko
|
| posted on 26/9/07 at 06:50 PM |
|
|
I used 40mm in side tube if that helps
with zx9r--e carbs
|
|
|
David Jenkins
|
| posted on 26/9/07 at 07:00 PM |
|
|
I'm after 44 or 45mm OD, about 5mm wall thickness... (CBR600 carbs)
|
|
|
GaryM
|
| posted on 26/9/07 at 07:00 PM |
|
|
Hiya
I've just measured the fzr600 Mikuni carbs that are destined for the Xflow and they are:
33mm ID, 38mm OD
How much is there?
Cheers
Gary
|
|
|
theconrodkid
|
| posted on 26/9/07 at 07:36 PM |
|
|
ill have a measure morra,there are about 8-10 feet in 1 foot or so sections of the small size and a lot more of a bigger size,if they are usable sizes
ill wisk them away before the pikies pay a visit
who cares who wins
pass the pork pies
|
|
|
Confused but excited.
|
| posted on 26/9/07 at 08:34 PM |
|
|
I wouldn't say no to two pieces of approx 33mm i,d., in exchange for for beer tokens, if there is any going.
Grovel, grovel.
Tell them about the bent treacle edges!
|
|
|
JohnN
|
| posted on 26/9/07 at 09:00 PM |
|
|
I'd be interested in any 38mm ID / 43mm OD for GSXR 600 TB's. ID is the important dimension, the OD can be turned down?
Thanks
|
|
|
garage19
|
| posted on 26/9/07 at 10:04 PM |
|
|
quote:
Originally posted by David Jenkins
I'm after 44 or 45mm OD, about 5mm wall thickness... (CBR600 carbs)
David think i may have some. Will have a measure up in the worshp tomorrow.
Doug.
|
|
|
David Jenkins
|
| posted on 27/9/07 at 11:44 AM |
|
|
Cheers Doug!
|
|
|
theconrodkid
|
| posted on 27/9/07 at 05:52 PM |
|
|
ive managed to liberate the bits that will fit in my car.
i have 2x10" lengths of 33mm id and 3x42inch lengths of38mm id ,both are 5mm wall.
if you are interested please u2u me with how much you want and ill chop n post
who cares who wins
pass the pork pies
|
|
|
theconrodkid
|
| posted on 13/10/07 at 02:47 PM |
|
|
ok i have 1 length of 33mm id that is 43",2X8" lengths and 15X31/2 bits left,anyone interested please u2u me
who cares who wins
pass the pork pies
|
|
|
