Fatboy Dave
|
| posted on 31/10/07 at 01:13 PM |
|
|
Zetec GSXR throttle bodies on eBay
Being sold by my brother - daft bugger is going to fit a turbo instead 
CLICKY
Dave
Stop the planet, I want to get off
|
PLEASE NOTE: This user is a trader who has not signed up for the LocostBuilders registration scheme. If this post is advertising a commercial product or service, please report it by clicking here.
|
|
|
worX
|
| posted on 31/10/07 at 01:14 PM |
|
|
Why isn't he keeping the throttle bodies with the turbo install?
Nothing to me with me, all the best with the sale and all that! I just wondered!
Steve
|
|
|
matt_claydon
|
| posted on 31/10/07 at 01:42 PM |
|
|
Because it's rather hard to plumb the output of a turbo into 4 separate bodies!  And also there's no point - the additional breathing
ability you get with individual bodies is all but useless when you're forcing the air in anyway.
|
|
|
Fatboy Dave
|
| posted on 31/10/07 at 02:46 PM |
|
|
Well, I had offered to make him a plenum for it (as I built the bike setup).
He's going for a modified Rover setup though, as the GSXRs really need the injector pockets drilling out to take 14mm Bosch injectors to allow a
proper boost seal (istead of the rubber ring on the stock pico injectors).
Shame, it's a nice setup 
I think he'll also take offers on it too.
Dave
Stop the planet, I want to get off
|
PLEASE NOTE: This user is a trader who has not signed up for the LocostBuilders registration scheme. If this post is advertising a commercial product or service, please report it by clicking here.
|
