maximill666
|
posted on 15/7/09 at 03:55 PM |
|
|
Can anyone make me a couple of small alloy sleeves
I am looking for a couple of small alloy sleeves to be made.
Only 50mm long, 12mm in diameter, with an internal diameter of 6mm
Basically just a couple of sleeves to fit over M6 bolts. Can anyone help me out, beer tokens waiting.
Thanks.
|
|
|
trextr7monkey
|
posted on 15/7/09 at 07:46 PM |
|
|
I'm on holiday at moment could do them sometime next week, but strangelywe are in Liverpool On Saturday for a meal, I suggest you try Coozer
atb
Mike
http://www.flickr.com/photos/14016102@N00/ (cut and paste this dodgey link)
Our most recent pics are here:
http://s129.photobucket.com/albums/p211/trextr7monkey/
|
|
cjtheman
|
posted on 15/7/09 at 09:28 PM |
|
|
b&q do ally tube with 6mm hole that i used for my front grill but i think o/d is just over 10mm
it was about £5 for a 1m lengh
hth
cheers
colin
wanted
sunny weather
sva pass 12/6/09
taxed 16/6/09
|
|
Steve Hignett
|
posted on 15/7/09 at 09:31 PM |
|
|
I think I've got some tube that'll do that already, will measure it for you tomorrow...
|
|
maximill666
|
posted on 15/7/09 at 09:58 PM |
|
|
quote: Originally posted by Steve Hignett
I think I've got some tube that'll do that already, will measure it for you tomorrow...
Thanks Steve thats great
Mike if I get stuck I will u2u you next week, cheers
|
|
coozer
|
posted on 16/7/09 at 07:10 AM |
|
|
Yep, could easily help out there if I had the raw material... had a look and only got 28mm diameter atm...
1972 V8 Jago
1980 Z750
|
|
Farway
|
posted on 16/7/09 at 09:27 AM |
|
|
Where you at?
|
|
Steve Hignett
|
posted on 19/7/09 at 07:05 PM |
|
|
Completely forgot all about this - Sorry...
I do have some, but it's 6mm ID and 12.67mm OD - I assume that will be ok?
If so then let me know your address and I'll bung some in the post this week!
ATB
|
|