RichardK
|
| posted on 22/12/10 at 08:31 PM |
|
|
Thick flange plate or spare zetec head
Could do with borrowing either a thick piece of plate which was probably used to bolt down the flange when welding up an exhaust or spare zetec
head.
I need to bend the exhaust manifold I have about an inch and need something to hold the flange down whilst I warm it up and give it some.
Or has somebody got a spare scrap engine that I can fetch my propane bottle and torch and do it at you place if you're localish? Will bring
beer 
If anybody could help in anyway with the above that would be really great.
Cheers
Rich
Gallery updated 11/01/2011
|
|
|
|
|
whitestu
|
| posted on 23/12/10 at 08:52 AM |
|
|
I've got a spare head, but probably a bit far away!
Stu
|
|
|
norm007
|
| posted on 23/12/10 at 10:34 AM |
|
|
quote:
Originally posted by RichardK
Could do with borrowing either a thick piece of plate which was probably used to bolt down the flange when welding up an exhaust or spare zetec
head.
I need to bend the exhaust manifold I have about an inch and need something to hold the flange down whilst I warm it up and give it some.
Or has somebody got a spare scrap engine that I can fetch my propane bottle and torch and do it at you place if you're localish? Will bring
beer
If anybody could help in anyway with the above that would be really great.
Cheers
Rich
I have a spare 1.8 silver top sat on garage floor.
You are more than welcome to come and use it.
Something about this, so very wrong.....I have to laugh out loud, I wish I didn`t like this!!!!!!!!!!!!!!
|
|
|
RichardK
|
| posted on 23/12/10 at 01:40 PM |
|
|
Norm, you're a star, I'll send you a u2u.
Cheers
Rich
Gallery updated 11/01/2011
|
|
|
norm007
|
| posted on 25/12/10 at 07:21 AM |
|
|
Hi Rich.
U2U replied to!!!!!!!!!!!!!!!!!!!!!!!!
Something about this, so very wrong.....I have to laugh out loud, I wish I didn`t like this!!!!!!!!!!!!!!
|
|
|
