RickRick
|
| posted on 1/6/11 at 01:08 PM |
|
|
Piper Pinto vernier pully spares
Anyone happen to have a damaged piper vernier pully they want rid of, we've stripped one of the inserts in ours, i've mailed piper, but
can't imagine they'd sell just an insert
Thanks
|
|
|
|
|
norm007
|
| posted on 1/6/11 at 01:29 PM |
|
|
What is the insert made of?
How does it fit?
Could you not rethread it with a "threadsert" (a type of helicoil).
Could the part be turned on a lathe or would it need a milling machine
If you post it to me for a pattern I might be able to knock a new insert up on my lathe.
All I would want is a stamped addressed envelope for me to return it to you.
Would be good if you could post a photo of it on here as well.
Regards,
Norm
[Edited on 1/6/2011 by norm007]
[Edited on 1/6/2011 by norm007]
Something about this, so very wrong.....I have to laugh out loud, I wish I didn`t like this!!!!!!!!!!!!!!
|
|
|
RickRick
|
| posted on 1/6/11 at 01:46 PM |
|
|
it's very thin walled, m6 thread, or 6mm fine, with small splines around the outside to lock it into the main body of the pully, would be a
bit of a pig to remake
|
|
|
