Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Bike carbs fuel pump location
Charlie_Zetec

posted on 29/6/11 at 02:08 PM Reply With Quote
Bike carbs fuel pump location

Looking at places to install the fuel pump for my zetec on bike carbs.

Is there anything I should be thinking about before I find a home for it, such as vertical or horizontal fitting, below the fuel tank, etc.?

Advice appreciated, pictures even more so!







Artificial intelligence is no match for natural stupidity!

View User's Profile View All Posts By User U2U Member
jossey

posted on 29/6/11 at 02:13 PM Reply With Quote
dont people put it at the fuel tank end?





Thanks



David Johnson

Building my tiger avon slowly but surely.

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
bbwales

posted on 29/6/11 at 02:39 PM Reply With Quote
Hi,

I have mine mounted on the chassis by the fuel tank with no problems, I also have a filter before the pump, and am running a Zetec on bike carbs.

Regards

Bob

View User's Profile View All Posts By User U2U Member
wylliezx9r

posted on 29/6/11 at 02:54 PM Reply With Quote
Mine is located on engine side of tranny tunnel and works a treat.





I spent a lot of money on booze, birds and fast cars. The rest I just squandered.
George Best

View User's Profile E-Mail User View All Posts By User U2U Member
whitestu

posted on 29/6/11 at 03:38 PM Reply With Quote
Definitely put it at the back of the car close to the tank.

I had mine initially in the engine bay and it worked fine. However I kept getting minor air leaks which meant the pump kept running when it should have stopped.

I moved it to the back of the car just underneath the tank so it was gravity fed and since then I haven´t had any more problems.

Stu

View User's Profile View All Posts By User U2U Member
jacko

posted on 29/6/11 at 04:08 PM Reply With Quote
Bike ticker pumps push the fuel so it wants to be at the rear next to the tank mine is horizontal
I hope this helps
Jacko

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
stevec

posted on 29/6/11 at 04:28 PM Reply With Quote
Another vote for rear, mine kept dying at the front.
Steve






View User's Profile View All Posts By User U2U Member
daviep

posted on 29/6/11 at 04:40 PM Reply With Quote
Mines on the bulkhead in front of the scuttle, worked perfectly for 2000miles and still working.

Davie

[Edited on 29/6/11 by daviep]





“A truly great library contains something in it to offend everyone.”

View User's Profile E-Mail User View All Posts By User U2U Member
bigfoot4616

posted on 29/6/11 at 06:00 PM Reply With Quote
i know everyone recommends them at the rear but when i got my car it was at the front.
3 years later with a few thousand road miles and about 20 trackdays its never caused me any problems

View User's Profile View All Posts By User U2U Member
kipper

posted on 29/6/11 at 07:40 PM Reply With Quote
pump....(this is not an instruction)..DIRTY BOY

I have mine at the front on the bulkhead, went all over northern france and belgium with no bother.
Regards Denis,





Where did that go?
<<<<

View User's Profile E-Mail User View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.