bbwales
|
posted on 13/9/11 at 09:27 AM |
|
|
Stainless Steel
Hi All,
I need help please, I am after a Stainless Steel disc very very shiny it needs to be 230mm dia with a 22mm hole in the middle. It is not for the car
but for my shower.
Can anyone help please?
Beer tokens waiting.
Regards
Bob
|
|
|
Fred W B
|
posted on 13/9/11 at 07:29 PM |
|
|
I can't help, being where I am, but it would help others if you would spec the thickness required.
Generally full polished stainless is only available off the shelf in probably 1.2mm or less thickness. 2B brushed finish is easier to get.
Thicker material if required will have to be polished to spec.
Cheers
Fred W B
You can do it quickly. You can do it cheap. You can do it right. – Pick any two.
|
|
NigeEss
|
posted on 13/9/11 at 07:55 PM |
|
|
Contact Andyw7de, he can water jet cut to your requirements.
Time is an illusion. Lunchtime doubly so.................Douglas Adams.
|
|
bbwales
|
posted on 14/9/11 at 10:18 AM |
|
|
Many thanks for the advice gents.
Oh it only needs to be 1mm ish thick as it is purely for cosmetic purposes.
Bob
|
|