andylancaster3000
|
| posted on 12/8/18 at 07:34 PM |
|
|
WTD: 13 X 8 wheels. What have you got?!
Looking for a pair of ford fit wheels at 13*8 (7/8/9 wide considered). Anything considered (alloy, steel, Wellers banded etc). Ideally at cheaper
end of spectrum and ideally in Midlands. Needed in a bit of a hurry for an 'interesting' project for the coming weekend.
Any help appreciated.
[Edited on 12/8/18 by andylancaster3000]
|
|
|
|
|
mark chandler
|
| posted on 12/8/18 at 08:02 PM |
|
|
I can do you 4 X minilite, not clones £200, not interested in splitting.
From memory 2 have slicks, 2 have r888's on them, I live in Tadley, so if you are still in Fleet just a few miles down the road.
|
|
|
number-1
|
| posted on 13/8/18 at 01:51 PM |
|
|
Ive got 4 Starmag alloys. They are 7J x 13 and ET6 for MKII escort hubs. They will need a refurb as they have 'White worm' where they were
stored for a few years. They have slicks that are probably past it due to age.
They are in Aylesbury.
[Edited on 13/8/18 by number-1]
|
|
|
motorcycle_mayhem
|
| posted on 13/8/18 at 06:45 PM |
|
|
2 sets of 13" Image split rim BRM alloys, rather good condition, 10" wide. One pair slicks, one pair cut wets, crossply 8.2".
Westfield rears, as fitted to the factory Megablade.
Not at the budget end of your spectrum.
One Williams F1 13" wide magnesium wheel and slick (300/600R13), peg drive naturally, again in rather good condition. Thought I'd mention
it in case your project is a trike looking for a nice wide wheel.
|
|
|
andylancaster3000
|
| posted on 15/8/18 at 11:43 AM |
|
|
Hi all, thanks for the response. All 'a bit good' for my purposes - a tatty pair of Wellers or maybe Revs was more my thinking....
Will continue hunting.
|
|
|
