Need a little help guys and girls

I have a knocking when above 50 mph ish, seems like the propshaft. Looking furthur into it it does seem to be the UJ, how do i know what UJ it is to replace it?

Also, anyone else had the same or similar problem?

Cheers

Have you checked the prop adapter ?

Where in the UK are you

No i haven't, could it be that maybe

West Yorkshire

The UJ's on my prop were GKN Freelander. You will need to measure the overall width, and the diameter of the bearing cups,
expect to pay between £35-£50 a joint, any less than that are likely to be cheap Chinese ones
If you are stuck I have a new GKN joint somewhere in the garage.

Thanks 40 inches, i will let you know if i do

You could take your prop to the proffesionals to check like dunning and fairbanks.
http://www.dandfltd.co.uk/

Matty

Yes i was thinking of going straight to them but thought i would ask first

Thanks Matt

My prop developed a vibration about same speed ,it had started to come loose here to be tightened and re greased

Thanks KJ, i'll get it checked