LocostBuilders - powered by XMB

[Wanted] Sierra 7" Diff 100mm Flanges

ManuFromParis - 4/3/14 at 10:47 AM

Hi there,

I'm in the process of rebuilding a 7" 3.92 diff, putting a LSD in there, but I miss the 2 100mm Flanges, as there was none when I purchased this diff.

I assume these Flange are standard from all other models. Please tell me if I'm wrong.

EDIT : I'm looking for 3.62 Open Diff Flanges to complete the one I'm taking parts from. (please read further)

BTW, anyone know where to buy new circlips for that ?

This is it :

"Open" Diff :

[Edited on 4/3/2014 by ManuFromParis]

jacko - 4/3/14 at 10:55 AM

The lsd sierra diff has different out put shafts to a open sierra diff
The lsd shaft is longer on one side
Jacko

ManuFromParis - 4/3/14 at 11:02 AM

Thanks, I just read that post confirming that.

http://www.locostbuilders.co.uk/viewthread.php?tid=167125

I guess I'm after LSD Flanges, then.

mcerd1 - 4/3/14 at 11:09 AM

quote:
Originally posted by ManuFromParis
I guess I'm after LSD Flanges, then.

if you are fitting a ford LSD then yes you'll need the unequal length flanges - these could be very hard to find unless you buy a complete LSD

if you are fitting an aftermarket LSD (such as the quaife ATB) they mostly seem to use the equal length ones from the open diff's (and modify them to use snap rings instead of circlips)

[Edited on 4/3/2014 by mcerd1]

ManuFromParis - 4/3/14 at 11:21 AM

Eventually, I'll fit a Ford LSD from a complete Diff (that needed rebuilt) but I expected I could refit all remaing parts to have a 3.62 open diff for sale.

But I just realised that I'll use the unequal Flanges from old 3.62 on my project then I correct the Add : I'm looking for equal length Flanges for a 3.62 OPEN diff !!!
I'll correct first post

Sorry for confusion.

peter030371 - 4/3/14 at 01:28 PM

I might have some.....my diff is off being rebuilt at the moment and my bolt on shafts flanges are being replaced by Quaife parts. When I get the diff back I will see if the old flanges are what you are after and let you know

ManuFromParis - 4/3/14 at 01:52 PM

Great !
Looking forward to it.

peter030371 - 21/3/14 at 07:20 PM

Are you still after these as I have a pair now that I no longer need?

ManuFromParis - 24/3/14 at 01:16 PM

yes, peter --> U2U