Where can I get an M19 x 0.8 or imperial equivalent?

Want to to tap a bit of alli for a starter switch.

Does such a size exist? Where from?

Steve

most starter switches I've seen have their own nut

only M19's I can see are for 1 & 1.5, not 0.8

sure you have measured the thread correctly?

3/4 UNF probably..... but 16 tpi = 1.58 mm pitch

[Edited on 24/6/09 by 02GF74]

Try www.tracytools.com - helpful and quick on mail order.
HTH.
Cheers, Pewe

quote:

---

Originally posted by Mr Whippy
most starter switches I've seen have their own nut

only M19's I can see are for 1 & 1.5, not 0.8

sure you have measured the thread correctly?

---