Board logo

Repairing GRP with flowcoat?
40inches - 11/5/11 at 12:16 PM

I managed to drop the aeroscreen and take out two chunks
I plan to chase out the crazing with a Dremel and build up the missing bits and fill in the crazing with flowcoat.
Would this work?

Triton - 11/5/11 at 12:42 PM

Yes flowcoat is ideal to use, wait till it's cured then flat it down with wet n dry and polish it up...simples..

nick205 - 11/5/11 at 12:43 PM

DIFFICULT TO SEE - I CAN'T GET FAR ENOUGH BACK

Should work though!



[Edited on 11/5/11 by nick205]

[Edited on 11/5/11 by nick205]

[Edited on 11/5/11 by nick205]

[Edited on 11/5/11 by nick205]

40inches - 11/5/11 at 12:54 PM

quote:
Originally posted by nick205
DIFFICULT TO SEE - I CAN'T GET FAR ENOUGH BACK

Should work though!



[Edited on 11/5/11 by nick205]

[Edited on 11/5/11 by nick205]

[Edited on 11/5/11 by nick205]

[Edited on 11/5/11 by nick205]


Open the patio doors or get a wide screen monitor

40inches - 11/5/11 at 12:55 PM

quote:
Originally posted by Triton
Yes flowcoat is ideal to use, wait till it's cured then flat it down with wet n dry and polish it up...simples..


Thanks for that

ashg - 11/5/11 at 01:23 PM

his username gives away the size of his monitor