Board logo

Ratchet Open Barrel Crimper
Nitrogeno25 - 8/8/11 at 05:04 AM

Hi,

I'm trying to find a crimper suitable for 8awg terminals, something like this:

http://cgi.ebay.com/ebaymotors/Professional-Ratchet-Open-Barrel-Crimper-AWG-20-10-_W0QQcmdZViewItemQQhashZitem35b2887b9aQQitemZ230628555674QQptZMotors Q5fAutomotiveQ5fTools

What is everybody using to crimp this terminals?




Thanks!!

tony-devon - 8/8/11 at 07:34 AM

try vehiclewiringproducts

I purchased my crimpers from them, well worth having the proper tools

jollygreengiant - 8/8/11 at 08:20 AM

I refer you to previous post(s) and mine in particular, if go to the durite catalogue link it will find you the one you are after.

LINKY DINKY

myke pocock - 8/8/11 at 11:36 AM

Arent those the terminals that need soldering? There exactly like the ones I use.

Nitrogeno25 - 8/8/11 at 01:30 PM

quote:
Originally posted by tony-devon
try vehiclewiringproducts

I purchased my crimpers from them, well worth having the proper tools


I purchased the MP71, works fine, but I need to crimp bigger terminals! Thanks!

rusty nuts - 8/8/11 at 06:14 PM

Toolstation item no 42429 £20.39 or Screwfix item no 96795 £24.00

Nitrogeno25 - 8/8/11 at 06:54 PM

quote:
Originally posted by rusty nuts
Toolstation item no 42429 £20.39 or Screwfix item no 96795 £24.00


Thanks but those are not suitable for these terminals!