Board logo

Nasty
Mr Whippy - 19/10/12 at 11:36 AM

LOL in there I guess is a very clean wheel...

Sorry if you were about to have your lunch!!

[img][/img]

[Edited on 19/10/12 by Mr Whippy]

ReMan - 19/10/12 at 11:43 AM

Gadzooks, is that a hole dug in a driveway specially!

loggyboy - 19/10/12 at 11:47 AM

Breeze blocks and a liner - nice idea!

ReMan - 19/10/12 at 11:50 AM

hA ha Oh yes I can see it now!!

owelly - 19/10/12 at 12:03 PM

Just don't lick your Moley Grips.... The chrome will cause offence...

Mr Whippy - 19/10/12 at 12:19 PM

quote:
Originally posted by owelly
Just don't lick your Moley Grips.... The chrome will cause offence...


yeah your right but they've been used many times in the past for this and the chrome has all but gone at the grips, but it's a good point

maccmike - 19/10/12 at 12:22 PM

looks bit like a curry I had

liam.mccaffrey - 19/10/12 at 12:32 PM

we need an after pic

Agriv8 - 19/10/12 at 12:46 PM

Is the landy steering box dop arm the next in line for treatment ?

Regards

Agriv8

Dingz - 19/10/12 at 01:04 PM

Is that one of Heston Blumenthal's recipes?

r1_pete - 19/10/12 at 01:22 PM

How much current are you using, seems way too much, be careful you don't end up with a brittle wheel.....

ashg - 19/10/12 at 02:37 PM

Be careful disposing of the water there may be chromium in it.

omega0684 - 19/10/12 at 04:27 PM

i immediately thought. . . . . CHILLI!

fullpint - 19/10/12 at 05:59 PM

quote:
Originally posted by r1_pete
, be careful you don't end up with a brittle wheel.....

Could well end up that way if you intend just using wet paint/2-pack..

designer - 19/10/12 at 06:01 PM

You should not use 'chromemoly' vise grips as a contact. The chrome, like stainless steel give off a poisonous gas!!

skodaman - 19/10/12 at 07:02 PM

Thought you were doing electrolysis in a pizza for a minute.

Slimy38 - 19/10/12 at 07:08 PM

quote:
Originally posted by omega0684
i immediately thought. . . . . CHILLI!


That was exactly my thought too!

Peteff - 19/10/12 at 09:45 PM

quote:
Originally posted by designer
You should not use 'chromoloy' vice grips as a contact. The chrome, like stainless steel give off a poisonous gas!!


The amount of chrome on those will be negligible, are you a HSE inspector by any chance ?

blakep82 - 19/10/12 at 09:49 PM

did anything come back out?
i thought it looked like curry rather than chilli, and i don't like either

jonabonospen - 19/10/12 at 11:56 PM

If only I could fit my parts in the toilet I could just have a curry and make one of those myself

loggyboy - 20/10/12 at 12:00 AM

quote:
Originally posted by designer
You should not use 'chromemoly' vise grips as a contact. The chrome, like stainless steel give off a poisonous gas!!


Surell thats only if its used as the anode?, which it isnt here.

Mr Whippy - 22/10/12 at 04:52 PM

for those who are interested in how the wheels come out of that mess! they were encrusted with thick rust front and back but now just bare metal, what fun


fullpint - 22/10/12 at 06:02 PM

If the rust is no more I presume the area where it was is slightly pitted now?
I have used some stuff from Safety-kleen where you soak any thing made of steel and it turns the rust into solid matter!!!

Confused but excited. - 22/10/12 at 06:49 PM

1800cc! That's one powerful charger you got there.