Hi,
Anyone up here able to cut a 2" BSP thread for me or lend the die?

I need to make up a dummy solid insert for the boat flexible coupling to line up the engine to the prop shaft so I can fit the engine mounts.

Have some 2" pipe and 2" threaded flanges but no way to thread them

Cheers!

I was in a similar situation a few years ago....I had a piece of steel pipe that needed 2inch bsp thread on the end but no one I knew had a die!

I ended up going to my local speedy hire and the chap behind the counter took my pipe and threaded the end for me with one of these....

http://www.speedyservices.com/product/17_0300-h/hand-threader-electric-amigo-2/productoverview

Hth

Over the past few years I posted out quite a few taps, dies, and odd tools and stuff. Most of which never got posted back to me. For that reason, I won't post my pipe dies out but if you tell me how long you want the pipe (in length, not timescale!) I'll thread you a lump of 2" steam pipe and stick it in the post.

quote:

---

Originally posted by owelly
Over the past few years I posted out quite a few taps, dies, and odd tools and stuff. Most of which never got posted back to me. For that reason, I won't post my pipe dies out but if you tell me how long you want the pipe (in length, not timescale!) I'll thread you a lump of 2" steam pipe and stick it in the post.

---

Thanks Owelly bits received and spot on

U2U sent