Anybody used one of these Wolf Professional MIG 195 Welder ebay no 251360717133 £234.99

Thanks for any info, good or bad.

It depends what you want it for, 40 amp minimum isn't very good, for sheet steel you need 30, preferably 25.

Plus there is a red disclaimer about power supply needing to be industrial, from a 13A supply you'll pop fuses above 160 amp output, which effectively means you're buying a 40 - 160 amp machine if its domestic use.

I would look at the Clarke or R Tech range, I've never used one but Wolf don't seem very well respected for welders....

No experience with Wolf, but can recommend the Clarke 151TE.