What's a good/sturdy make?
[Edited on 18/12/04 by Damon Hill]
I have the Machine Mart 1 ton Economy Folding one, cost about £175, 5 years ago. works fine for me.
Ditto. Couple of foibles but structurally sound.
Should clarify that...
The plate the handle for moving it around on is OK but I have heard of it bending slightly.
On mine, the pin through the release valve that the handle twists has dropped off - easily replaced with an allen key just dropped through the hole.
1 ton folding econ from m.mart for me too. I used it to remove a 2.9 v6 ford engine and type 9 gearbox from a tvr s3 and put it back in
single-handedly and had no problems at all. I nearly bought the half tonne but the rating drops pretty quickly if you extend the arm out for more
reach.
I also use it to lift my bike (fireblade) in order to remove the wheels and so on.
Mark
quote:
Originally posted by dern
1 ton folding econ from m.mart for me too. I used it to remove a 2.9 v6 ford engine and type 9 gearbox from a tvr s3 and put it back in single-handedly.
Mark
yep, i've got one, well, i own one. Mine lives at friends houses as they borrow it and i never remember to collect it )
One of the best purchases i've made.