Anyone have a calculation I could use to calculate torque applied using a
lever of length x and load of y grammes ?
It's for a physics lesson thing.
More than you could ever need
http://en.wikipedia.org/wiki/Torque
Yeah, torque in Newton-Metres is Load in Newtons x Length in metres (surprisingly )
1 Newton is 102 grammes so:
Torque = Mass(g) x Length(m) / 102
Hope this helps...
Matt.
[Edited on 4/8/06 by matt_claydon]
quote:
Originally posted by NigeEss
Anyone have a calculation I could use to calculate torque applied using a
lever of length x and load of y grammes ?
It's for a physics lesson thing.
quote:
Originally posted by NigeEss
SO at 90 degrees the torque eg of 1 kilo at 1metre from fulcrum is 1 x 1 x sin(90) = 1NM. Torque decreases with sin as angle changes.
quote:
Originally posted by matt_claydon
That would actually be 1kgm = 9.81Nm.
quote:
Originally posted by gingerprince
quote:
Originally posted by matt_claydon
That would actually be 1kgm = 9.81Nm.
Depends what planet you're on. I was working on the assumption of a planet slightly larger than earth where 1Kg exherts 1N
You were indeed correct to point out my c0ck up tho!
[Edited on 4/8/06 by gingerprince]
Also depends on underlying rock.
i wanted a transmission box because my prop had quet some angle
20 / 30 degrees.
Tks