I don't suppose anyone has a manual for a Clarke 150TE Turbo welder that they could scan for me?

I just bought one from eBay and it didn't have the manual with it - can't seem to find one to download either.

i've got the 135te, will have a look see if the manual covers the 150.

Ray

I think if you email here they could send or email you a manual or Machinemart will email manuals.


http://www.clarkeinternational.com/service.htm

interested to hear what its like to weld with

I have the very manual.
U2u me if you get nowhere with the Clarke service dept and I'll willingly do a copy for you.

Regards
Barry

Thanks chaps!

I've emailed Clarke and MachineMart and we'll see how I get on. If I get no luck, I might take you up on your generous offer, Barry.

Doughie - I'm very much a beginner with the whole welding thing, so I'm not sure what weight my opinion would carry as to what it's like...any problems are most likely to be mine rather than the machines!!!

[Edited on 11/9/06 by daKlone]

Both MachineMart and Clarke have replied with the requested manual already!

Great work by those guys - very impressed.

cheers DaKlone, guess you answerd my question - i'm a beginner too and strugled with a SIP Cosmo... but it didnt help me to weld and it sounds like the Clarke's a bit like that too - let me know how you get on...

ta again

have one I can post to you if you still need it

Cheers chap, but I think I'm sorted now...however, my 150TE Turbo isn't like the one in the manuals I got sent!

Mine has a row of rocker switches rather than a rocker switch and rotary switch as shown in the manual...don't suppose it matters much as I think the settings work out the same, just a bit odd all the same.

mine had the 3 switches too.

settings in order of power are lo1, loa2, loa3, hi1, hia2, hia3