Board logo

Wide band Lamba Sensor
oliwb - 6/11/06 at 06:38 PM

Hi anyone got one of these that I could borrow?? I think its this that I need I just want to check if my mixture is roughly right on my bike carb'd pinto....seems to be guzzling and start stinking of petrol and back firing and missing every now and again.....Cheers Oli.

garage19 - 6/11/06 at 06:44 PM

What bike carbs are they? I have jetted a few sets now for pintos and may be able to recommend a pretty spot on set up.

oliwb - 6/11/06 at 06:55 PM

ZX7r on a 1.6 pinto....Oli.

Meant to say 38.5 mm chokes

[Edited on 6/11/06 by oliwb]

garage19 - 8/11/06 at 08:19 AM

Try a 170 man jet.

oliwb - 8/11/06 at 07:34 PM

Using 175's at the mo....was what Bogg BRo's suggested. Its been ported, bumpy cam, lightened, balanced flowed etc etc so think its probably about right....I'd just like to check to be sure...Oli.

garage19 - 8/11/06 at 07:40 PM

quote:
Originally posted by oliwb
Using 175's at the mo....was what Bogg BRo's suggested. Its been ported, bumpy cam, lightened, balanced flowed etc etc so think its probably about right....I'd just like to check to be sure...Oli.


????? why did you spend all that money on a 1600???

back to the jets... i usually run a 185/190 main on a 2ltr pinto to get the afrs where i want them.