I could do with getting some bits of plate cut, last ones were done with a laser by my mate in his old job and they were spot on.

Need 4 bits about 50x50mm cut out of 3mm mild, and might also be interested in a couple of bits about 150x150 out of 4mm but I can do without those.

Any leads? Any locosters got a laser cutter at work and want some beer money?

Can supply DXFs or whatever is needed.

quote:

---

Originally posted by CaLviNx
Hi

Even though you think I'm a right *unt, if you give me the template in a thin ply and pay for steel and postage I will cut them for you with plasma. U2U me if you interested.

---

Give Marc a shout at MNR, he may be able to sort you out.

[Edited on 19/3/07 by coozer]

Give John (jroberts) a try, he can supply laser cut plate from dxf's.

Cheers

Alex

Sounds like Clear your Conscience with Plasma Therapy.....It`s gonna be some leccy Bill

Alex

What's wrong with jigsaw or angry grinder and 1mm cutting disk? use flap disk and file to finish edges. shouldn't take more than an hour to do the lot!

Caber

could run them off for you no probs end of this week, running 3mm thursday and 4 friday, if you have a dxf file it should be a doddle

cheers

marc