Board logo

pro tech shocks tool
Stuart_B - 22/6/08 at 03:14 PM

hi all, is there a special tool you use to adujst the shocks with?

if so where do you get it from?

thanks

stuart

fesycresy - 22/6/08 at 03:16 PM

C spanner.

Try Demon Thieves etc etc.

Or just jack the car to take the pressure off and do it by hand.

joolsmi16 - 22/6/08 at 03:47 PM

I've havd the same prob. a c spanner does not fit correctly so use a alligator wrench.
Or as previous try taking the load off which is the easiest method even if you have the correct spanner..

indykid - 22/6/08 at 04:49 PM

quote:
Originally posted by joolsmi16
I've havd the same prob. a c spanner does not fit correctly


erm........yes it does. are you sure you have a 1.9" one and not a 2.25?

i got mine from the gaz stand at one of the shows. was £4-5 iirc.
tom

iscmatt - 22/6/08 at 05:21 PM

yeah, i got mine from the protec stand last year. It fits. I turned mine by hand to start with, car jacked up so wheels were off the ground, but needed a bit more so got the spanner

Mark G - 24/6/08 at 05:53 PM

have a look in the for sale section, some in there for £5.

Stuart_B - 24/6/08 at 07:56 PM

i have put my name down for one, just need make sure it it is a 1.9 not 2.25 tool i need.

stuart