I know people often ask on here
"whats the best/quickest way of cutting chassis tubes?"
noticed this on Aldi's special offers tomorrow, never used a rage saw myself, may be of use to someone, opinions welcome
http://www.aldi.co.uk/uk/html/offers/2867_7487.htm
I have seen them used. Very good thats a bad price either.
ive used one on 1" rebar,seems to work ok but blades wore out quick if you let them get hot and wernt cheap,on light box and tube they will prob
be ok
Damn.............look's like I'll be getting up early Sunday morning and dashing down to my local Aldi !
I'm getting really fed up with breaking hacksaw blade's and banging my knuckles on the vice 
I believe that saw can only cut at 90 degrees.
I have the Rage3 which is basically a cut off/mitre/bevel saw. It does the job nicely and I think it was £150.
off topic - ive just bought a £65 facom version of this .
http://www.aldi.co.uk/uk/html/offers/2867_7490.htm
oh , and thats not a rage saw , its an evolution2 . which i think can be used at an angle .
i have a rage 3 and its brilliant
Machine mart do the Evolution 3,which is the sliding bevel type for £90 +vat and they have a vat free day coming up.
[Edited on 11/10/08 by triumphdave]
quote:
Originally posted by triumphdave
Machine mart do the Evolution 3,which is the sliding bevel type for £90 +vat and they have a vat free day coming up.
[Edited on 11/10/08 by triumphdave]