thepest
|
| posted on 19/11/09 at 08:28 AM |
|
|
Radiator fan fitting kit
Can I use these to attach the oil cooler to my rad?
LINK
|
|
|
|
|
tul214
|
| posted on 19/11/09 at 08:32 AM |
|
|
I have used them to fit my fan but I would say that they will not hold the weight of an oil cooler.
1.6 Raw Super6 sold
|
|
|
Mr Whippy
|
| posted on 19/11/09 at 09:02 AM |
|
|
I've also heard they tend to saw through the matrix from vibrations so I'd probably use something else or make a bracket to mount the
cooler to the chassis rather than the radiator
Fame is when your old car is plastered all over the internet
|
|
|
BenB
|
| posted on 19/11/09 at 10:53 AM |
|
|
I have also heard about radiator failures due to the cable tie edges...
|
|
|
rusty nuts
|
| posted on 19/11/09 at 07:27 PM |
|
|
You could use them but I wouldn't
|
|
|
thepest
|
| posted on 20/11/09 at 06:35 AM |
|
|
In fact... I'm not.. fabrcating brackets for the oil cooler. I cannot fit it in fron of the rad so it had to go behind  But I am going to try
a naca duct to try and get some more cold air over it.
|
|
|
.jpg)
