tegwin
|
| posted on 18/3/12 at 11:31 AM |
|
|
Individual taps?
Anyone know where I could purchase an individual tap? I need an M4 tap to replace one that I snapped. Sure there are loads on ebay but I need it for
tomorow but not sure where to try and find one!
------------------------------------------------------------------------------------------------------------------------
Would the last person who leaves the country please switch off the lights and close the door!
www.verticalhorizonsmedia.tv
|
|
|
|
|
stevebubs
|
| posted on 18/3/12 at 11:35 AM |
|
|
I use the local ironmongers
|
|
|
coozer
|
| posted on 18/3/12 at 11:48 AM |
|
|
Cromwells do them, good quality stuff.
1972 V8 Jago
1980 Z750
|
|
|
David Jenkins
|
| posted on 18/3/12 at 12:23 PM |
|
|
Tracy Tools - a premium supplier to the model engineering trade.
If you only want something to use occasionally, get a carbon tap - otherwise pay the premium for high-speed steel (HSS). Even the HSS taps are
cheap.
Probably the most straight-dealing company you'll ever deal with... if they supply something that's not up to standard they'll send
a replacement straight after you contact them.
|
|
|
blakep82
|
| posted on 18/3/12 at 01:34 PM |
|
|
tapdie.com or .co.uk
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
Talon Motorsport
|
| posted on 18/3/12 at 06:05 PM |
|
|
yellow pages , google , 118 118 look up a very local engineering company go round and ask to borrow one? leave them with £20 and get it back when you
return it hopefully unbroken?
|
|
|
tegwin
|
| posted on 18/3/12 at 06:10 PM |
|
|
quote:
Originally posted by Talon Motorsport
yellow pages , google , 118 118 look up a very local engineering company go round and ask to borrow one? leave them with £20 and get it back when you
return it hopefully unbroken?
That could work.. although with my luck this weekend... I would snap the bugger... Why is it no matter how careful you are, you ALWAYS snap a
drill/tap on the last opperation on a workpiece... GRRRR
------------------------------------------------------------------------------------------------------------------------
Would the last person who leaves the country please switch off the lights and close the door!
www.verticalhorizonsmedia.tv
|
|
|
