whpracer
|
| posted on 1/10/04 at 10:53 PM |
|
|
what is a good tube notcher
i'v been looking at different tube notcher at E-bay , but i'm not sure witch one is good quality for it's price ? maybe one of you
has a good suggestion ?
|
|
|
|
|
JohnN
|
| posted on 2/10/04 at 10:41 AM |
|
|
I found that using the "tubermiter" program, to draw and print a template worked really well. I used a thin (0.8mm thk) curtting disc in
an angle grinder and was easily able to cut good notches at all sorts of angles for welding up my roll bar and stays.
(search google for tubemiter and you'll find a download site)
John
|
|
|
pintoman
|
| posted on 2/10/04 at 05:09 PM |
|
|
£75
see http://www.chesteruk.net/tube_notcher.htm
|
|
|
Peteff
|
| posted on 2/10/04 at 07:23 PM |
|
|
£75
Plus carriage plus a set of holesaws? It only goes to 45 degrees as well.
[Edited on 2/10/04 by Peteff]
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
MikeR
|
| posted on 7/10/04 at 10:12 PM |
|
|
yeah but if you turn the steel round it does from 45 to 90 degrees!
|
|
|
stephen_gusterson
|
| posted on 7/10/04 at 10:23 PM |
|
|
quote:
Originally posted by MikeR
yeah but if you turn the steel round it does from 45 to 90 degrees!
and costs minus 75 quid!
a bargain!
atb
steve
[Edited on 7/10/04 by stephen_gusterson]
|
|
|
Terrapin_racing
|
| posted on 8/10/04 at 03:01 PM |
|
|
Good tool - got one
|
|
|
