carpmart
|
| posted on 21/9/14 at 05:36 PM |
|
|
Need a machine shop to fit two helicoils to a small engine for me
Chaps
I've a small 30cc 2 stroke engine I use in my RC car. It's stripped the thread a couple of times where it bolts the exhaust Manifold on.
I've drilled and remapped this but it's ultimately not held. I need to helicoil it. I'm in Bedfordshire and work in maidenhead and
Newbury quite a bit. Anyone know somewhere I could get this little job done?
Thanks
[Edited on 21/9/14 by carpmart]
You only live once - make the most of it!
Radical Clubsport, Kwaker motor
'94 MX5 MK1, 1.8
F10 M5 - 600bhp Daily Hack 
Range Rover Sport - Wife's Car
Mercedes A class - Son's Car
|
|
|
|
|
ian locostzx9rc2
|
| posted on 21/9/14 at 06:25 PM |
|
|
Couldn't you buy a set off eBay and do it yourselve the sets on eBay are £10 to £15!
|
|
|
rick1962uk
|
| posted on 21/9/14 at 06:30 PM |
|
|
what size thread is it you need
|
|
|
carpmart
|
| posted on 21/9/14 at 07:00 PM |
|
|
quote:
Originally posted by rick1962uk
what size thread is it you need
ive got a failed M5 thread at present
You only live once - make the most of it!
Radical Clubsport, Kwaker motor
'94 MX5 MK1, 1.8
F10 M5 - 600bhp Daily Hack
Range Rover Sport - Wife's Car
Mercedes A class - Son's Car
|
|
|
carpmart
|
| posted on 21/9/14 at 07:00 PM |
|
|
quote:
Originally posted by ian locostzx9rc2
Couldn't you buy a set off eBay and do it yourselve the sets on eBay are £10 to £15!
are they any good and can you link me?
You only live once - make the most of it!
Radical Clubsport, Kwaker motor
'94 MX5 MK1, 1.8
F10 M5 - 600bhp Daily Hack
Range Rover Sport - Wife's Car
Mercedes A class - Son's Car
|
|
|
ReMan
|
| posted on 21/9/14 at 07:09 PM |
|
|
Like so? THREAD REPAIR KIT METRIC M5 5MM CAN BE USED WITH HELICOIL INSERTS
www.plusnine.co.uk
|
|
|
rodgling
|
| posted on 21/9/14 at 07:11 PM |
|
|
Looks like the kit I used for my calliper brackets on the 7, it was quite easy and gave a good result.
|
|
|
big_wasa
|
| posted on 21/9/14 at 07:22 PM |
|
|
What size did you re tap it out to ?
If you just ran a tap through the M5 you will be able to use an m5 kit. If you went to M6 You will need an M6 kit. Is there enough meat to tap it for
the insert ?
A quality M5~M6 kit will set you back £20~£25 but to be honest a cheap ebay kit should be fine for what you need and its quicker to do it your self
than get in the car and take it some where.
|
|
|
carpmart
|
| posted on 21/9/14 at 07:37 PM |
|
|
thanks for all the advice fellas, I've splashed out on an eBay special kit, should be fine for what I need!
Cheers
You only live once - make the most of it!
Radical Clubsport, Kwaker motor
'94 MX5 MK1, 1.8
F10 M5 - 600bhp Daily Hack
Range Rover Sport - Wife's Car
Mercedes A class - Son's Car
|
|
|
