coozer
|
| posted on 6/4/15 at 06:04 PM |
|
|
Removing sticky back plastic?
I have a piece of ally for my bonnet that has come with a layer of plastic stuck to it, a bit like a road sign... Cough...
Anyways how do I get the sticky back plastic off? What's the best stuff to loosen the glue?
Was thinking of using the blowtorch but it would probably take longer to clean the mess up afterwards!
1972 V8 Jago
1980 Z750
|
|
|
|
|
Ben_Copeland
|
| posted on 6/4/15 at 06:13 PM |
|
|
Hair drier or hot air paint stripper. Get it warm and hope it peals off nice. Then solvent to dissolve the glue.
Ben
Locost Map on Google Maps
Z20LET Astra Turbo, into a Haynes
Roadster
Enter Your Details Here
http://www.facebook.com/EquinoxProducts for all your bodywork needs!
|
|
|
owelly
|
| posted on 6/4/15 at 06:18 PM |
|
|
Toffee wheel!
http://www.ebay.co.uk/itm/STRIPE-REMOVING-WHEEL-TOFFEE-CARAMEL-GLUE-MOULDING-RUBBER-DECAL-DRILL-BIT-/171743496823?pt=LH_DefaultDomain_3&hash=item2
7fcb5ca77
[Edited on 6/4/15 by owelly]
http://www.ppcmag.co.uk
|
|
|
r1_pete
|
| posted on 6/4/15 at 06:29 PM |
|
|
quote:
Originally posted by Ben_Copeland
Hair drier or hot air paint stripper. Get it warm and hope it peals off nice. Then solvent to dissolve the glue.
Yup, if you heat the reverse, the glue releases from the ally and stays on the plastic, if you heat the plastic invariably you'll end up with
sticky bits left on the ally.
|
|
|
coozer
|
| posted on 6/4/15 at 06:37 PM |
|
|
Thanks, trouble is the plastic is stuck on both sides!!!
1972 V8 Jago
1980 Z750
|
|
|
ReMan
|
| posted on 6/4/15 at 07:56 PM |
|
|
Cant you just wrap the rest of the car to match and register it as a Loughborough A6, Newark A46?
www.plusnine.co.uk
|
|
|
coozer
|
| posted on 7/4/15 at 04:05 PM |
|
|
Lol, if I do that I'll have people following thinking they are going to Beamish Museum 
1972 V8 Jago
1980 Z750
|
|
|
