Staple balls
|
posted on 19/6/15 at 09:06 AM |
|
|
Pumping Kerosene.
So, due to landlord related issues, I need a shift a few (maybe 150) litres of kerosene.
I know the pikeys use these
but I suspect there's a slight risk of loss of fingers.
This looks a bit more promising, but again with
the no flammables.
Any ideas chaps?
|
|
|
mcerd1
|
posted on 19/6/15 at 09:13 AM |
|
|
what about an electric lift pump off the fuel tank of any old diesel car/van/lorry....
-
|
|
britishtrident
|
posted on 19/6/15 at 09:22 AM |
|
|
Kerosene like diesel vapour is normally below the danger point electric pump should be no problem.
Im my experirncr electric drill pumps are normally pretty cr**
[I] “ What use our work, Bennet, if we cannot care for those we love? .”
― From BBC TV/Amazon's Ripper Street.
[/I]
|
|
big_wasa
|
posted on 19/6/15 at 10:27 AM |
|
|
150L is around £50 worth, not a lot of point spending £30 to get it out. Depending on the age of the tank there will be sediment and water in there
any way.
If the tank is of the floor just take the pipe of and fill some 25L tubs
|
|
blakep82
|
posted on 19/6/15 at 11:11 AM |
|
|
Cheap electric fuel pump off eBay? Can be had for under a tenner
http://www.ebay.co.uk/itm/12v-Universal-Electric-Fuel-Pump-Suitable-for-Diesel-Petrol-Engines-12-Volt-/221746787792?pt=LH_DefaultDomain_3&hash=ite
m33a12375d0
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
Staple balls
|
posted on 19/6/15 at 11:32 AM |
|
|
quote: Originally posted by big_wasa
150L is around £50 worth, not a lot of point spending £30 to get it out. Depending on the age of the tank there will be sediment and water in there
any way.
The tank is pretty new, and frankly, I'd rather take it and dispose of it at the tip than leaving this delightful gentleman anything of any
value.
|
|
Brian R
|
posted on 19/6/15 at 11:59 AM |
|
|
Something like this would do the job.
http://www.ebay.co.uk/itm/12V-Water-Submersible-Pump-Refueling-Transfer-Oil-Diesel-Fuel-And-2M-Outlet-Hose-/351429901731?pt=LH_DefaultDomain_3&has
h=item51d2dabda3
|
|
RickRick
|
posted on 19/6/15 at 02:28 PM |
|
|
we use a fuel injection pump same as fitted to my bec to pump petrol in and out of the race car, give a decent flow rate just push rubber hoses on
each end seems to be fairly good at self priming too.
not 100% sure how it would work with kerosene other option is a tank or lift pump from a diesel in the scrappers
|
|
Staple balls
|
posted on 19/6/15 at 02:41 PM |
|
|
Thinking about it, I do happen to have a scrap diesel felica on the drive, that might work.
|
|
ste
|
posted on 19/6/15 at 07:09 PM |
|
|
quote: Originally posted by Staple balls
quote: Originally posted by big_wasa
150L is around £50 worth, not a lot of point spending £30 to get it out. Depending on the age of the tank there will be sediment and water in there
any way.
The tank is pretty new, and frankly, I'd rather take it and dispose of it at the tip than leaving this delightful gentleman anything of any
value.
Just tip a load of sawdust in there then
|
|
Staple balls
|
posted on 19/6/15 at 07:11 PM |
|
|
|
|
bi22le
|
posted on 19/6/15 at 10:11 PM |
|
|
That is evil, I like it!
Track days ARE the best thing since sliced bread, until I get a supercharger that is!
Please read my ring story:
http://www.locostbuilders.co.uk/forum/13/viewthread.php?tid=139152&page=1
Me doing a sub 56sec lap around Brands Indy. I need a geo set up! http://www.youtube.com/watch?v=EHksfvIGB3I
|
|