Paul_Arion
|
| posted on 1/5/17 at 12:47 PM |
|
|
Circular saw blade for cutting Aluminium
Hi all
Can anyone recommend the best sort of blade for cutting 1.6mm aluminium sheet. Need one for my circular saw (165mm with 20mm bore)
Thanks
Paul
|
|
|
|
|
GeoffT
|
| posted on 1/5/17 at 01:42 PM |
|
|
165mm Professional Silver PMC Metal Cutting Circular Saw Blades 40TCT Teeth on ebay - never tried one though, so don't
know how durable they are.
|
|
|
Paul_Arion
|
| posted on 1/5/17 at 02:52 PM |
|
|
Perfect thanks - I've ordered one of those 🙂
|
|
|
Paul_Arion
|
| posted on 1/5/17 at 02:52 PM |
|
|
Double posted sorry
[Edited on 1/5/17 by Paul_Arion]
|
|
|
chillis
|
| posted on 1/5/17 at 04:37 PM |
|
|
you do realise that blade is for a cut off saw not a circular wood type saw.
You will need something much finer if you are to attaempt cutting ally sheet with a hand held circular saw, and the local hospital on speed dial.
Never under estimate the ingenuity of an idiot!
|
|
|
rusty nuts
|
| posted on 1/5/17 at 06:14 PM |
|
|
Fine metal cutting blade in a jigsaw using plenty of cutting fluid,if it's an awkward shape then debut the edges . Or cut it using a pair of
tinsnips.
|
|
|
nick205
|
| posted on 2/5/17 at 09:56 AM |
|
|
quote:
Originally posted by rusty nuts
Fine metal cutting blade in a jigsaw using plenty of cutting fluid,if it's an awkward shape then debut the edges . Or cut it using a pair of
tinsnips.
I'd opt for an Aluminium cutting blade in my jigsaw. Slower maybe than a circular saw, but safer too IMHO.
|
|
|
Myke 2463
|
| posted on 2/5/17 at 11:21 AM |
|
|
Personally would NEVER use this blade on sheet alloy . from supplier " Designed and produced to achieve fast and clean cuts in various metal
sections."
Metal sections are normally extruded box, angle or tube.
I agree with Chillis.................. you do realise that blade is for a cut off saw not a circular wood type saw.
You will need something much finer if you are to attempt cutting ally sheet with a hand held circular saw, and the local hospital on speed dial.
Be Lucky Mike.
|
|
|
Paul_Arion
|
| posted on 2/5/17 at 12:27 PM |
|
|
I've found a specific fine blade designed for aluminium / plastics now so ordered one of those. It's only for 1.6mm Ali sheet but some
long straight cuts ( fully flat floor on my car ) so am sure it'll be fine. Thanks for the replies all
|
|
|
Angel Acevedo
|
| posted on 2/5/17 at 04:43 PM |
|
|
I used a craftsman 10" Table saw, the home duty one, I couldn´t find one like mine on the online catalog, so I think it´s no longer available.
I cut up to 3 mm thick ali plate with no problems.
Carbide toothed disc. Only drawback, the saw shoots an incredible amount of swarf....
and you need to dress the cuts.
YMMV...
Beware of what you wish.. for it may come true....
|
|
|
.jpg)
