caber
|
 posted on 1/12/05 at 10:46 PM |
|
|
Nuts and Bolts
I am looking at what nuts and bolts I will need. It looks like i need M10 X 65 bolts to get through the suspension brackets and give enough thread on
the outside of the Nyloc to show it is properly fixed. 70s will be too long and 60s won't show any threads especially if I use washers. anyone
know where ican get these on the net?
TIA
Caber
|
|
|
|
|
Avoneer
|
| posted on 2/12/05 at 12:06 AM |
|
|
Use longer ones and cut them down.
That's what I did.
Pat...
No trees were killed in the sending of this message.
However a large number of electrons were terribly inconvenienced.
|
|
|
emsfactory
|
| posted on 2/12/05 at 12:08 AM |
|
|
namrick are pretty good for supply.
|
|
|
Danozeman
|
| posted on 2/12/05 at 06:47 AM |
|
|
Screwfix is good to. Free delivery next day.
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
smart51
|
| posted on 2/12/05 at 08:14 AM |
|
|
Use 70s. Is the extra 5mm really going to be that bad? Namrick are good but I have often paid more in postage that the cost of the hardware.
Find a local supplier. They are hard to track down but often have everything and are cheap. Look under fasteners and fixings in yellowpages.
|
|
|
02GF74
|
| posted on 2/12/05 at 10:19 AM |
|
|
quote:
Originally posted by caber
I am looking at what nuts and bolts I will need. It looks like i need M10 X 65 bolts to get through the suspension brackets and give enough thread on
the outside of the
Caber
what about these people, local to me:
its a dynamic url so copy and paste into your browser.
http://www.fastfixdirect.co.uk/code/navigation.asp?HeadDrive=HEXAGON&Diameter=10MM&Thread=all&Length=65MM&Filtered=True&PageID=1&a
mp;MainCategoryID=5&ProductCategoryID=131&fType=Fasteners&search=Show+Items
[Edited on 2/12/05 by 02GF74]
|
|
|
Hornet
|
| posted on 2/12/05 at 01:37 PM |
|
|
Caber.... Let me know what you want and I should be able to sort u out. A shot at ur misses will cover the cost 
John
|
|
|
caber
|
| posted on 2/12/05 at 11:25 PM |
|
|
John
Thanks for the offer, may have a problem with payment terms, I don't have a Misses! ( or eben a Miss at the moment:-(
Caber
|
|
|
Hornet
|
| posted on 3/12/05 at 05:08 PM |
|
|
lol.. nps was worth a try. anyways dude... let me know what you need, I have access to plenty for free.
ps.. have a few things left over from my build if you need anything else.
Cheers
|
|
|
oliwb
|
| posted on 3/12/05 at 05:39 PM |
|
|
Bentley's are good for stainless stuff...I'd also by long ones and cut them down, bit time consuming and a pain in the arse but means you
can get things exactly how you want them, and avoids the old damn run out of 70's and 60's are too short!.....Oli.
If your not living life on the edge you're taking up too much room!
|
|
|
caber
|
| posted on 3/12/05 at 10:49 PM |
|
|
Oli
Nicking them off Bentleys will take a fair bit of time and people will start to get suspicious when their expensive cars start falling to bits as soon
as they get in :-)
Caber
|
|
|
oliwb
|
| posted on 4/12/05 at 10:06 AM |
|
|
LOL.....now thats a good idea! Maybe rolls royce would offer an even superior bolt! Except there does seem to be rather more Aston's around
edinburgh I find at the moment...maybe they'd do??? Oli.
If your not living life on the edge you're taking up too much room!
|
|
|
%20(WinCE).JPG)
