Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: polishing mops
john_p_b

posted on 22/5/06 at 12:22 PM Reply With Quote
polishing mops

anyone good at selecting these? been looking around for something to buff up some alloy bits i've got lying around (manifolds, alternator casings, cam covers etc)

looking on ebay at different buffing wheels but there seems to be a few different ones to chose from and i'm not sure what to go for.

THIS PLACE has a selection to go at.

or how about this kit HERE?

any advice?

cheers
john





built a car, built a home, had a family. lost the family, lost the home, still got the car.

View User's Profile View All Posts By User U2U Member
cryoman1965

posted on 22/5/06 at 01:06 PM Reply With Quote
Got mine from Machine Mart £12.87.Fits in a drill. 2x buff wheels 1x spindle and soap. Works really well. imho
Check my manifold pic in archive for example.

Nige

View User's Profile E-Mail User View All Posts By User U2U Member
trextr7monkey

posted on 22/5/06 at 04:33 PM Reply With Quote
We use K and M supplies from Sheffield tel 0114 247 4733 for a catalogue, they haven't heard of on line shopping or any of that new fangled stuff, but are very cheap for mops and polishing compounds, the kids seem to spend a lot of time buffing- therapeutic I guess!





http://www.flickr.com/photos/14016102@N00/ (cut and paste this dodgey link)

Our most recent pics are here:
http://s129.photobucket.com/albums/p211/trextr7monkey/

View User's Profile E-Mail User View All Posts By User U2U Member
johnjulie

posted on 25/5/06 at 09:36 PM Reply With Quote
Ideally you need a kit that has the arbors to fit on a bench grinder. If you have a 6" grinder you will need a RH 1/2" arbour, 8" grinder has a 5/8" shaft.
If you can get to a good classic or Kit car show, there are usually dealers selling buffing mops and kits much cheaper than Ebay etc.
At Stoneleigh, I got 8" mops for £12 a pair.
The smaller mops are OK for small items, but they are very time consuming and don't last very long.
Depending on what power source you are using, the bigger the better!
It's a lot easier to hold the piece onto the fixed buffer, than to buff using a drill etc.
Cheers John

[Edited on 25/5/06 by johnjulie]





JFDI
"Just F*****G Do It"

View User's Profile E-Mail User View All Posts By User U2U Member
wilkingj

posted on 26/5/06 at 12:55 PM Reply With Quote
Ive used www.shesto.com (or was it co.uk) good service and resaonable prices.






1. The point of a journey is not to arrive.
2. Never take life seriously. Nobody gets out alive anyway.

Best Regards
Geoff
http://www.v8viento.co.uk

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.