Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Pit in the grage floor?
JackNco

posted on 19/9/06 at 12:48 AM Reply With Quote
Pit in the grage floor?

Heya all
Before i start on a kit ive gotta get my garage up to scratch. its been unused for a numhber of years n so need a bit of work.... but earlier when chatting to a guy up theroad he sugested puttinga pit in the floor, so i can work under the car.

Has anyone else done this? is it worth it? or shoud i not bother.

I was thinking after the car is finished as well. changing bits and feteling?

John





Some people are worried about the difference between right and wrong. I'm worried about the difference between wrong and fun.
O'Rourke, P.J. (1989), Holidays in hell. London (Picador)

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
millenniumtree

posted on 19/9/06 at 01:39 AM Reply With Quote
I was thinking of doing the same. I have a concrete floored garage and I was thinking of cutting a trench with a concrete saw, digging it out, put metal sides in and filling in the gap with some concrete. This should make it waterproof and spacious enough to nearly stand up in. Then I can put a little step ladder in so I can get in and out.

Instant personal oil change shop!

I've seen at least one other person dig a shallow trench in a dirt floored barn. Not as spiffy but not as expensive either.

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
JackNco

posted on 19/9/06 at 02:29 AM Reply With Quote
i wasnt even gonna go that far. just dig it out stick a pond liner in and line it with hardboard... long as its not 2 stupid an idea

John





Some people are worried about the difference between right and wrong. I'm worried about the difference between wrong and fun.
O'Rourke, P.J. (1989), Holidays in hell. London (Picador)

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
ch1ll1

posted on 19/9/06 at 07:09 AM Reply With Quote
AT home it might be a good idea !
but it needs to be water proof
my fater inlaw has one and he just has a pump in it now (fills up)

we have one at work never use it , think we used it about 3 times in five years.

alot of hassle taking all the boards off
i did think about it when i built my new garage , but didnt bother






View User's Profile E-Mail User View All Posts By User U2U Member
David Jenkins

posted on 19/9/06 at 07:29 AM Reply With Quote
Most professional garages don't have them any more due to safety issues - fumes settling in the pit, difficulty of getting out in an emergency, and so on.

That's why most places have car lifts...

David






View User's Profile Visit User's Homepage View All Posts By User U2U Member
oliwb

posted on 19/9/06 at 07:32 AM Reply With Quote
Not sure its worth the hassle since 2 anf 4 post lifts regularly come up on Ebay for circa £200-300.....you'd spend more than that on concrete and ladders and a pit will never be as versatile.....Oli.





If your not living life on the edge you're taking up too much room!

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
graememk

posted on 19/9/06 at 07:34 AM Reply With Quote
how offen do you even need to work under a 7 ?

i dont think there is anything under mine

View User's Profile Visit User's Homepage View All Posts By User U2U Member
MikeR

posted on 19/9/06 at 07:36 AM Reply With Quote
plus don't forget, lots of gasses sink, they'll then collect in the pit. you walk in, breath them, fall over, don't get out.

be careful.

View User's Profile View All Posts By User U2U Member
speed8

posted on 19/9/06 at 07:50 AM Reply With Quote
My new place has got one in the garage, along with a beam for an overhead hoist. I quite like the idea but I'll be keeping my eye open for a lift too.
View User's Profile View All Posts By User U2U Member
mike smith1

posted on 19/9/06 at 08:06 AM Reply With Quote
We have one in our garage, fantastic for stripping the donor. Used it during build a couple of times to. Definatly worth it i think.

Speed8 what kind of lift 2 post or 4 post?

Mike

View User's Profile E-Mail User View All Posts By User U2U Member
nick205

posted on 19/9/06 at 08:32 AM Reply With Quote
a car lift is all well and good and for £2-300 a bargain too, but how many domestic garages have you been in that are tall enough to raise a car 6ft in the air ???

I wouldn't bother with a pit myself. It would take a poo load of digging and lining for something that you'll hardly ever use, except as a store room for old junk maybe. A decent high lift trolley jack and 4 axle stands should be all you need.

View User's Profile View All Posts By User U2U Member
speed8

posted on 19/9/06 at 09:25 AM Reply With Quote
quote:
Originally posted by mike smith1
We have one in our garage, fantastic for stripping the donor. Used it during build a couple of times to. Definatly worth it i think.

Speed8 what kind of lift 2 post or 4 post?

Mike


I haven't quite decided yet. I need to wait till I move in to the place and see how much space I have. The pit is deep and that with axle stands might do everything I need.

View User's Profile View All Posts By User U2U Member
StevieB

posted on 19/9/06 at 09:33 AM Reply With Quote
I wouldn't bother - better off just getting some high rise axle stands and a jack. By the time you've finished the build, I bet you hardly ever go to the underside of the car (maybe once or twice a year at the most?)
View User's Profile View All Posts By User U2U Member
Peteff

posted on 19/9/06 at 09:42 AM Reply With Quote
You can only get at the middle of a car from most of the pits I've seen in domestic setups. You need something like the MOT stations use to be really useful with the rails either side and a pneumatic jack on the rails across the pit. Also I've never needed anything better than trolley jack or axle stands for any work on the locost. I also know a mechanic who was badly burned and disfigured in a pit by petrol vapor ignited by a spark.





yours, Pete

I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.

View User's Profile View All Posts By User U2U Member
David Jenkins

posted on 19/9/06 at 09:48 AM Reply With Quote
The best pit-equivalent I've ever encountered was at a friend's house. He lived on a fairly steep hill, so there was quite a drop at the back end of the garage's concrete pad. He put a second-hand garage door at the rear, together with 2 double-brick walls extending backwards (he was a builder, BTW!).

All he had to do was open the back door and roll the car out onto the walls. He then had clear access to the underneath of his car by standing in the garden! I never fancied rolling the car out, though...

David






View User's Profile Visit User's Homepage View All Posts By User U2U Member
StevieB

posted on 19/9/06 at 09:59 AM Reply With Quote
So all you need to do is find a steep hill and build a house on it. Or, dig a massive crater at the back of your garage!

I'll get started on mine tonight - the wife will be delighted!

View User's Profile View All Posts By User U2U Member
greggors84

posted on 19/9/06 at 10:07 AM Reply With Quote
quote:
Originally posted by David Jenkins
The best pit-equivalent I've ever encountered was at a friend's house. He lived on a fairly steep hill, so there was quite a drop at the back end of the garage's concrete pad. He put a second-hand garage door at the rear, together with 2 double-brick walls extending backwards (he was a builder, BTW!).

All he had to do was open the back door and roll the car out onto the walls. He then had clear access to the underneath of his car by standing in the garden! I never fancied rolling the car out, though...

David


SplitRivet from this forum has done this very thing, im sure it was him anyway. Was a simple way of getting underneath the car.

I have been looking out for 2 post lifts for a while, not been looking very hard but the ones i have seen have gone for about £700+ Converting one of the barns at my parents house into a garage so have quite a lot of height to play with.





Chris

The Magnificent 7!

View User's Profile E-Mail User View All Posts By User U2U Member
Phil.J

posted on 19/9/06 at 10:28 AM Reply With Quote
There is always the option of buying or making one of those frames advertised in Practical Classics. Bolts to the front and rear of the car, or on the hubs and you can just roll it on it's side.
View User's Profile E-Mail User View All Posts By User U2U Member
StevieB

posted on 19/9/06 at 10:34 AM Reply With Quote
quote:
Originally posted by Phil.J
There is always the option of buying or making one of those frames advertised in Practical Classics. Bolts to the front and rear of the car, or on the hubs and you can just roll it on it's side.


The watch all of you fuel and oil spill all over the place!

View User's Profile View All Posts By User U2U Member
emsfactory

posted on 19/9/06 at 10:40 AM Reply With Quote
A friend of mine dug a pit and put two long boards over it. then his old man rolled his bond bug over, nose first.
View User's Profile E-Mail User View All Posts By User U2U Member
JamJah

posted on 19/9/06 at 10:55 AM Reply With Quote
The structural integrity of a concrete floor is likely to be the fact that it doesn’t have a hole in the middle. You’d probably need to reinforce the rest. Oh and when you sell the house I believe you have to prove it meets building regs.
The other thing is you’d be possibly affecting the water table. Think of standing on a huge balloon filled with water: it squiges to the sides and then up.

Maybe wrong…

View User's Profile View All Posts By User U2U Member
Danozeman

posted on 19/9/06 at 02:39 PM Reply With Quote
WE have a mobile lift at work. its a handy piece of kit. JUst slide it under and away you go. Ours is 3 phase but you can get others that run off a truck battery..





Dan

Built the purple peril!! Let the modifications begin!!

http://www.eastangliankitcars.co.uk

View User's Profile View All Posts By User U2U Member
JamJah

posted on 19/9/06 at 02:51 PM Reply With Quote
Or single to three phase converter, although probably worth more than the lift!
View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.