bracey
|
| posted on 1/12/06 at 12:02 AM |
|
|
dials in dash
best way to cut dials into a carbon fibre dash please !!!!!
much appreciated
richard
|
|
|
|
|
Humbug
|
| posted on 1/12/06 at 07:25 AM |
|
|
I masked up with masking tape, drilled a couple of pilot holes and used a jigsaw
|
|
|
marshall
|
| posted on 1/12/06 at 08:13 AM |
|
|
mask up with masking tape and use a hole cutter.
|
|
|
nick205
|
| posted on 1/12/06 at 01:19 PM |
|
|
masking tape and a hole saw on a nice slow speed. Will help if you use a pillar drill rather than doing it by hand - you'll get much better
control and a neater hole.
|
|
|
