zilspeed
|
posted on 13/1/09 at 09:38 PM |
|
|
Netto Hoist
Like the one I have.
Fantastic value.
Netto Hoist - £39.99
This Thursday - 15th January
|
|
|
sprouts-car
|
posted on 13/1/09 at 10:10 PM |
|
|
quote: Lifting Weight: 125Kg - 250Kg
How does that work then? It cant do 100Kg?
|
|
coozer
|
posted on 13/1/09 at 10:13 PM |
|
|
I have one of them and I've lifted zetec's in and out no problem. It has a loop hook to increase the lifting weight
1972 V8 Jago
1980 Z750
|
|
Z20let Corsa
|
posted on 13/1/09 at 10:22 PM |
|
|
i got one of these about 2 weeks after xmas for £17.50!!! from netto. it lifts the rover v8 with gbox no probs!!!
|
|
dave1888
|
posted on 13/1/09 at 10:30 PM |
|
|
going to have one of those
|
|
dhutch
|
posted on 13/1/09 at 10:39 PM |
|
|
Looks very much like this, which we bought one of a while back.
- We use it to lift a boat against the garage roof, but its s decent bit of kit.
As said, the two numbers are its two rated lifting amounts. Depending if you use the pulley to double it over or not.
Daniel
|
|
zilspeed
|
posted on 13/1/09 at 11:02 PM |
|
|
quote: Originally posted by dave1888
going to have one of those
Remember they're England only shops Dave.
Hopefully you have some reason to be down there and can pick one up. Then you can do the
Zil Mod for a cost of around £20. Makes it so much more useful, especially when
you start howking that new engine in.
P.S. If you still have the welder to get sorted out, I can do the trolley for you if you decide you want to do the whole gantry thing.
|
|
dave1888
|
posted on 14/1/09 at 06:04 PM |
|
|
I cant get one up here.
|
|
zilspeed
|
posted on 14/1/09 at 06:28 PM |
|
|
Maybe get someone to send one up for you ?
|
|
cloudy
|
posted on 15/1/09 at 12:04 PM |
|
|
quote: Originally posted by sprouts-car
quote: Lifting Weight: 125Kg - 250Kg
How does that work then? It cant do 100Kg?
You can run them in single cable or double cable mode (half's lift distance - but still will do the height of the garage) The rating is for each
mode
www.warnercars.com
|
|