tilly819
|
| posted on 28/4/09 at 11:34 AM |
|
|
axminster handy reamer taper
Hi all what Taper is the axminster handy reamer (19mm) since they are out of stock till june (just phoned them) and need to get an alternative
chears tilly
F20C Haynes roadster 440 BHP/Tonne www.youtube.com/handmadeextreme
|
|
|
|
|
Steve Hignett
|
| posted on 28/4/09 at 11:34 AM |
|
|
Would you like to borrow mine?
|
|
|
tilly819
|
| posted on 28/4/09 at 11:51 AM |
|
|
Could do, i actualy already have one but i put it in the laithe to turn down the shank and found it was hardened and made abit off a mess off it so a
friend off mine has it to take it to his college to do it on a cylindrical grinder but he isnt very reliable and could take him AGES.
what makes it even more anoying is i found a 5-20 mm chuck for my milling machine the other day and iff i hadnt made a mess of it in the laith i could
have just held it in that *DOH*
oops i seem to have writen an essay
F20C Haynes roadster 440 BHP/Tonne www.youtube.com/handmadeextreme
|
|
|
Steve Hignett
|
| posted on 28/4/09 at 12:06 PM |
|
|
I didn't reply straight away, cos it took me four hours to read your post... 
Let me know if you want it - Just send me a U2U with your address etc and I'll post it to you unless you are going to Stoneleigh?
|
|
|
tilly819
|
| posted on 28/4/09 at 02:42 PM |
|
|
yeh i should be going to the show
F20C Haynes roadster 440 BHP/Tonne www.youtube.com/handmadeextreme
|
|
|
Steve Hignett
|
| posted on 28/4/09 at 08:12 PM |
|
|
Then I'll stick it in with the rest of my tools!
|
|
|
tilly819
|
| posted on 1/5/09 at 07:56 AM |
|
|
Iv had a stroke off luck and managed to get a chuck to hold the reamer and got the reamer back off my mate so i should be able to do the job ok now,
thanks evry so much for the offer though
Chears very much
tilly
F20C Haynes roadster 440 BHP/Tonne www.youtube.com/handmadeextreme
|
|
|
