Chris_R
|
| posted on 17/7/04 at 10:48 AM |
|
|
Parts gallow
Was thinking of making a rectangular box section frame with heavy duty steel mesh laid across the top. The idea is to suspend the frame so that
it'll allow me to hang parts from it for cleaning/painting. It's only gonna be about 300x600mm. Can anyone suggest a supplier for the
mesh? Nationwide if possible.
A bit of slapstick never hurt anyone.
http://www.chris.renney.dsl.pipex.com/
|
|
|
|
|
mangogroove
|
| posted on 17/7/04 at 11:35 AM |
|
|
mesh is ex pensive use 8mm rod instead
You want it when!
|
|
|
Peteff
|
| posted on 17/7/04 at 07:14 PM |
|
|
Concrete reinforcing.
Have a look round for construction sites. There's usually some lying around the place after they knock off.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
Chris_R
|
| posted on 17/7/04 at 07:28 PM |
|
|
Pete,
Not a bad idea. Tend to come across them once in a while due to work. I'll keep my eyes open.
Cheers.
A bit of slapstick never hurt anyone.
http://www.chris.renney.dsl.pipex.com/
|
|
|
DaveFJ
|
| posted on 19/7/04 at 08:07 AM |
|
|
cheap BBQ ?
Dave
"In Support of Help the Heroes" - Always
|
|
|
Chris_R
|
| posted on 19/7/04 at 04:35 PM |
|
|
Not a bad idea, but mightn't be able to weld it if the grill's been plated.
A bit of slapstick never hurt anyone.
http://www.chris.renney.dsl.pipex.com/
|
|
|
