designer
|
posted on 29/5/12 at 04:15 PM |
|
|
Car ramps
These seem good to me.
http://www.ausmini.com/forums/viewtopic.php?t=70986
|
|
|
steve m
|
posted on 29/5/12 at 04:51 PM |
|
|
personley i would have diaganal bars inbetween the uprights
|
|
D Beddows
|
posted on 29/5/12 at 05:03 PM |
|
|
I'm not at all sure they're actualy as usefull as they first appear - jobs that would be easier with the car raised up slightly but with
all four wheels still on are fairly limited.
|
|
Ben_Copeland
|
posted on 29/5/12 at 06:27 PM |
|
|
Nice i'll save them for another time.
Personnally i'd fix the width of them to the car width so they cant tip over sideways and put sides on them so you cant wonder off the edge...
Ben
Locost Map on Google Maps
Z20LET Astra Turbo, into a Haynes
Roadster
Enter Your Details Here
http://www.facebook.com/EquinoxProducts for all your bodywork needs!
|
|
nick205
|
posted on 29/5/12 at 07:09 PM |
|
|
All I can see is potential for an accident there, not enough triangulation (IMO) and too easy to tip the whole lot over laterally. Also, most folks
(in the UK) wouldn't have the space to store them the 362 days a year they're not in use.
|
|
Peteff
|
posted on 29/5/12 at 07:42 PM |
|
|
Triangulation is not going to help if all the load is in compression, more uprights or bigger ones would but they look plenty strong enough for what
they are doing there. As above though they are a bit limited in their function as you can only get to the middle bit of the car and the wheels are
still on.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
Simon
|
posted on 29/5/12 at 08:43 PM |
|
|
There is massive triangulation on there already (be nice if it went to a point though). Someone on here made something similar about 9 years ago but
iirc there were issues
Blimey - http://www.locostbuilders.co.uk/viewthread.php?tid=16708
Link therein still works
http://www.restorationramps.co.uk/
ATB
Simon
[Edited on 29/5/12 by Simon]
|
|