Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: chromed pipes
joolsmi16

posted on 25/11/05 at 07:53 PM Reply With Quote
chromed pipes

Hi Iam looking for some hints/tips on bending chromed oil pipes I have been told that they crack very very easily!!!! I have a pipe bender to help things but would it help to start a new bend on a existing one or remove so chrome??

Cheers

View User's Profile E-Mail User View All Posts By User U2U Member
oliwb

posted on 25/11/05 at 08:36 PM Reply With Quote
Try packing it out with silver sand (will stop it flattening) and should help stop it cracking a little bit...never done it tho so not sure.....Oli.





If your not living life on the edge you're taking up too much room!

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
Chippy

posted on 25/11/05 at 10:51 PM Reply With Quote
My experience with bending ready chromed pipe is that the chrome will crack on the bends. Rather spoils the effect, especialy as the rest will come of as well, at a later date. At least that is what I have found, better by far to bend up unchromed pipe, and then have it chromed.
View User's Profile E-Mail User View All Posts By User U2U Member
oliwb

posted on 25/11/05 at 11:00 PM Reply With Quote
Wott about using stainless steel instead then polishing it and lacquer to keep the shine?? Wouldn't rust internally either....just an idea....Oli.





If your not living life on the edge you're taking up too much room!

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
Hellfire

posted on 25/11/05 at 11:06 PM Reply With Quote
The chrome will deffo crack - use stainless if you want to resist corrosion. Forget the laquer it'll do nothing except go yellow. That's why it's called stainless






View User's Profile Visit User's Homepage View All Posts By User U2U Member
joolsmi16

posted on 26/11/05 at 01:00 AM Reply With Quote
chrome pipe

Thanks for replies is it the case that the chrome will crack but not the metal tube if I bend the chrome pipe I am a little worried that the metal pipe itself will need replacing, not worried about the chrome cracking buy very worried about the metal pipe cracking because of the oil pressure!!
View User's Profile E-Mail User View All Posts By User U2U Member
oliwb

posted on 26/11/05 at 05:04 PM Reply With Quote
You should certainly be able to bend the pipe without it cracking. Only one way to find out though.....(I wouldn't worry too much about oil pressure, if the pipe is gonna crack it'll do it with no oil pressure or 4 bar it won't make alot of difference - I wouldn't have thought!) Oli.





If your not living life on the edge you're taking up too much room!

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.