Steve Lovelock
|
| posted on 24/5/08 at 11:03 PM |
|
|
tool shops open on Sunday
Hi,
I need to buy some number punches in either 6mm or 10mm this weekend. Anybody know of a tool shop that might be open on Sunday / bank holiday Monday
in London or the South East?
|
|
|
|
|
watsonpj
|
| posted on 24/5/08 at 11:33 PM |
|
|
looks like machine mart are open monday and they have punches listed.
|
|
|
eznfrank
|
| posted on 25/5/08 at 06:23 AM |
|
|
Halfords are nearly always open. Not checked but I'm sure they sell punches.
|
|
|
Danozeman
|
| posted on 25/5/08 at 08:07 AM |
|
|
Im sure screwfix do number punches. There must be one of them near you.
screwfix
Theyr only 4mm mind you. I thought they did bigger,.
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
NeilP
|
| posted on 25/5/08 at 09:35 AM |
|
|
Steve,
If all else fails do you have a Dremel or equivalent - Do them by hand - A bit locost but does the trick...
If you pay peanuts...
Mentale, yar? Yar, mentale!
Drive it like you stole it!
|
|
|
rusty nuts
|
| posted on 25/5/08 at 09:45 AM |
|
|
Little tip when using the punches , the box section deforms! The diff top mounting area is thicker
|
|
|
Peteff
|
| posted on 25/5/08 at 12:50 PM |
|
|
Another tip is to do them in reverse order, it's a lot easier to line up the individual numbers and letters and space them evenly.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
.jpg)
