t16turbotone
|
| posted on 25/10/08 at 06:48 AM |
|
|
anyone with a brake press ???
hi folks, struggling to bend side panels nicely, think ive got wrong hardness! anyone own a sheet metal buisness?
help
|
|
|
|
|
coozer
|
| posted on 25/10/08 at 10:43 AM |
|
|
Took mine to a local glazing company. They had a huge bending machine for making shop front profiles. 2 minute job.
1972 V8 Jago
1980 Z750
|
|
|
austin man
|
| posted on 25/10/08 at 04:03 PM |
|
|
appears u may have the wrong thickness I clamped minbetween two pieces of wood then used a third piece and struck deftly with a hammer no problems at
all what thickness are you bending ?
|
|
|
Peteff
|
| posted on 25/10/08 at 04:32 PM |
|
|
If you've got the wrong hardness it will crack when you bend it, if it's too thick you will not get a bend it will curve. I clamped mine
to the chassis then bent it round the rails.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
.jpg)
