TallGuySmallBike
|
| posted on 10/2/14 at 08:42 PM |
|
|
Damn it. i just found out what it was 
You got me first.
Found this
[Edited on 10/2/14 by TallGuySmallBike]
|
|
|
|
|
Sam_68
|
| posted on 10/2/14 at 08:56 PM |
|
|
quote:
Originally posted by TallGuySmallBike
Also as for the king pin.. I was talking of this off set. Is this some kind of different angle needed?
Yes, you need caster as well... about 6 degrees worth of it, as a ballpark figure.
|
|
|
TallGuySmallBike
|
| posted on 10/2/14 at 09:02 PM |
|
|
Right well, Going off this i can try and work somthing out. Back soon!
|
|
|
TallGuySmallBike
|
| posted on 10/2/14 at 11:27 PM |
|
|
300 mm Lower wish bone.
240 - 250 mm Top Wishbone
300mm between the centres of pivots that attach the wishbones to the frame.
Thus giving a 9 degree King pin tilt thingymebob.
|
|
|
PhillipM
|
| posted on 12/2/14 at 02:03 AM |
|
|
What's the roll centres/instant centres like with that setting? They seem pretty short wishbones is all....
You'll want to be careful with the plunge on the driveshafts too, shouldn't be quite as bad with a double wishbone generally but
it's worth checking just in case.
P.S. XUD's suck balls - Ripp
[Edited on 12/2/14 by PhillipM]
|
|
|
TallGuySmallBike
|
| posted on 12/2/14 at 06:54 PM |
|
|
quote:
Originally posted by PhillipM
What's the roll centres/instant centres like with that setting? They seem pretty short wishbones is all....
You'll want to be careful with the plunge on the driveshafts too, shouldn't be quite as bad with a double wishbone generally but
it's worth checking just in case.
P.S. XUD's Are so amazing.. They are just the best - Ripp
[Edited on 12/2/14 by PhillipM]
This is a rough calculation.. Still finding my feet here. 
https://www.flickr.com/photos/116905236@N06/12484459283/
|
|
|
