thomas4age
|
| posted on 20/11/08 at 11:04 AM |
|
|
bought a new toy
Hey all,
it's been a while since I was on here, but I wanted to share something with you guys, mainly because I'm a novice in tig welding and need
some help hihi.
anyway, some time ago I bought a second hand cebora pocket mig, for which I made a nice dolly to run it around, I got some nice compliments for the 6
wheel offroad cart, after which I promissed to pimp the cart one day, 
well, I kinda did, or better build a new one completly out of aluminium, because I now can, (well sort off anyway)
last week I bought the first Gys digital 207 Ac/DC tig welder in the netherlands because I got a good price since it was their demo, they hadn't
even taken it out of the box yet because I rang the shop the same day it got delivered, it was a bit of a guess but I think it's a good
machine.
after doing some research on people stating that also this make is produced in china, I found out that Gys only has the battery chargers and things
alike produced there, but the welding equipment still is manufactured in europe (germany and france).
so laying pratice beads on sheet alloy for a week got me conviced enough to make a new dolly for both the machines out of 15mm square tube aluminium,
but D*mn is this difficult to do, the edges are the worst bit, which I think is all in positioning of the tungsten, which on my part still needs a lot
of praticing. some welds look absolutly horrible, some look very nice I didn't change anything to the machine..... how come????
however 2 machines and a 10kg bottle of argon on the trolly and it didn't collapse yet.....
piccie time.
old cebora pocket Mig 6 wheeler
 
mig rig 6 wheeler
New ally wheels
 
aluminium welder wheels
and fully equiped
 
mig tig rig
now do some more praticing and start on the intercoolers for the lexus engine...
grtz Thomas
[Edited on 20/11/08 by thomas4age]
If Lucas made guns, Wars wouldn't start either.
|
|
|
|
|
nick205
|
| posted on 20/11/08 at 11:26 AM |
|
|
Very posh
Could do with powder coating and some carbon detailing perhaps 
[Edited on 20/11/08 by nick205]
|
|
|
dubstar_04
|
| posted on 20/11/08 at 11:52 AM |
|
|
I've been meaning to build a simple version of something similar for a while.
Anyway I thought you said you were going to pimp it?
You should polish it and put some tinted perspex in the side panels, real bling!!
|
|
|
dinosaurjuice
|
| posted on 20/11/08 at 12:52 PM |
|
|
Aluminium is a fantastic conductor so i would have thought any difference to heat dissipation would be large compared to steel, therefore the welder
might need tweaking to suit different joins.
ive never used a tig, so that might be complete rubbish, but it makes sence to me
wil
|
|
|
Mr Whippy
|
| posted on 20/11/08 at 01:16 PM |
|
|
quote:
Originally posted by dinosaurjuice
Aluminium is a fantastic conductor so i would have thought any difference to heat dissipation would be large compared to steel, therefore the welder
might need tweaking to suit different joins.
ive never used a tig, so that might be complete rubbish, but it makes sence to me
wil
I tried TIG too, what a nightmare, didn't do nice welds at all 
too slow for me also
Fame is when your old car is plastered all over the internet
|
|
|
Alan B
|
| posted on 20/11/08 at 01:58 PM |
|
|
It amazes me how many people claim that TIG is easy......I think it either comes naturally, or it doesn't. I've migged for about 25 years
and do find it that very easy...but TIG, definitely waaay more difficult.
|
|
|
thomas4age
|
| posted on 20/11/08 at 02:15 PM |
|
|
Ok ok, not pimped properly I gues,
the powdercoating option is indeed a nice idea, might have it thrown into the oven together with a few different parts.....
and no Tig aint easy at all, that's one thing i found out. but I think with a lot of practice I might be able to have each weld come out the
same.
there's loads of alloy work comming up so, I'll just try and try again, till everything looks good. One thing is very nice btw, if you
screw up a weld, you can repair it quite easily by running the torch over it to smooth it out, then file the high spots, and run a nice bead over
it.
as long as the parts are connected to eachother i'm ok, but joining 2 parts is very difficult, I can get a decent weld in the middle of the
seam, but on the edges it's rubbish....
grtz Thomas
If Lucas made guns, Wars wouldn't start either.
|
|
|
maartenromijn
|
| posted on 20/11/08 at 02:25 PM |
|
|
I have tigged stainless steel, was do-able. Never tigged aluminium, they say it is difficult indeed.
Maarten
BLOG: http://thunderroad-super7.blogspot.com/
|
|
|
skodaman
|
| posted on 20/11/08 at 09:16 PM |
|
|
Not much triangulation on that. Don't go round corners too fast.
Skodaman
|
|
|
