aerosam
|
| posted on 20/3/09 at 12:04 PM |
|
|
what taper reamer is needed for maxi balljoints?
Hi Guys, I need to ream out my sierra front uprights to take the maxi balljoints, and have a HUUUGE radial arm drill at my disposal to do it with.
I just need to know what taper reamer i need.
Thanks
Sam
Had enough of this dictatorship known as LCB. Gone elsewhere, not coming back. Kiss my ass ChrisW.
|
|
|
|
|
Miks15
|
| posted on 20/3/09 at 12:15 PM |
|
|
I used one of these
I believe its a 1 in 8 reamer
|
|
|
locoboy
|
| posted on 20/3/09 at 04:32 PM |
|
|
I have a reamer i had made for the job by my toolmaker father in law,
You can borrow it if you want.
Thanks
ATB
Locoboy
|
|
|
aerosam
|
| posted on 20/3/09 at 06:41 PM |
|
|
Cheers, but your a little far away for me to pop round!
I'll have a dig around in the machine shop in work next week, i'm sure I'll find a 1 in 8 reamer somewhere!
quote:
Originally posted by locoboy
I have a reamer i had made for the job by my toolmaker father in law,
You can borrow it if you want.
Thanks
Had enough of this dictatorship known as LCB. Gone elsewhere, not coming back. Kiss my ass ChrisW.
|
|
|
