mid-buggy
|
| posted on 12/6/10 at 08:58 PM |
|
|
Infrared Thermometer
After a cheap one of these if anyone can recommend one.
|
|
|
|
|
austin man
|
| posted on 12/6/10 at 09:22 PM |
|
|
Try Maplins
http://www.maplin.co.uk/Module.aspx?ModuleNo=220790
Life is like a bowl of fruit, funny how all the weird looking ones are left alone
|
|
|
DRC INDY 7
|
| posted on 12/6/10 at 09:28 PM |
|
|
What do you want to do with it
if its tyres or cooling system then that would be ok but exhaust temps needs a higher reading type
https://www.facebook.com/groups/462610273778799/
Puddle Dodgers Club
|
|
|
mid-buggy
|
| posted on 12/6/10 at 09:38 PM |
|
|
sadly its for reading panel temps.
|
|
|
SeaBass
|
| posted on 13/6/10 at 11:20 AM |
|
|
I have this one. It works pretty well.
I presume your detailing / refinishing paint with a porter cable or similar and don't want to overheat the panels...
http://www.maplin.co.uk/Module.aspx?ModuleNo=46033&C=Froogle&U=46033&T=Module
[Edited on 13/6/10 by SeaBass]
|
|
|
David Jenkins
|
| posted on 13/6/10 at 12:54 PM |
|
|
I have the same as SeaBass - but when I bought it there was an offer on... £19.95 or similar...
|
|
|
mid-buggy
|
| posted on 13/6/10 at 01:43 PM |
|
|
I use DA on plastic (bumpers, grp etc) and the rotary on metal.
The temp gauge is more for the rotary than the da.
(yes i do have a ptg already)
|
|
|
.jpg)
