beaver34
|
posted on 8/12/10 at 10:54 PM |
|
|
turbo exhaust size
im having a 1600 turbo, what size exhaust do i want to be having? i have a 2.5" silencer at the moment i would like to keep, im looking to run
around 20psi and 250ish bhp will 2.5" flow enough?
thanks
|
|
|
Strontium Dog
|
posted on 8/12/10 at 11:16 PM |
|
|
That should be fine presuming it is a free flowing system! I run a 2.5" pipe after a 3" DP on a 300hp 2.0L engine.
|
|
ashg
|
posted on 8/12/10 at 11:27 PM |
|
|
I ran 325bhp on a 2.5inch exhaust. If you go too big you will lose your back pressure and keep blowing oil seals on the turbo
[Edited on 8/12/2010 by ashg]
Anything With Tits or Wheels Will cost you MONEY!!
Haynes Roadster (Finished)
Exocet (Finished & Sold)
New Project (Started)
|
|
beaver34
|
posted on 9/12/10 at 09:22 AM |
|
|
so it would be ok with 2.5" downpipe?
|
|
NS Dev
|
posted on 9/12/10 at 09:46 AM |
|
|
yea for that power it will be fine.
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
atspeed racing
|
posted on 9/12/10 at 04:05 PM |
|
|
2.5" is fine
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
sorens2
|
posted on 9/12/10 at 06:23 PM |
|
|
I have done 390 bhp on a 2.5" with a 2.2 L engine.
Soren S2
|
|
madteg
|
posted on 9/12/10 at 07:35 PM |
|
|
I run 2.5 on 320 BHP works for me.
|
|
bimbleuk
|
posted on 10/12/10 at 09:34 AM |
|
|
I had 2" on my Striker which was from when it was NA. That flowed 270BHP but was at the limit as the exhaust blued along most of the system at
bends or restrictions. I wanted to go to 2.25" but ended up with 2.5" parts as they were more readily available.
That was supercharged though and my preference for 2.25" was purely down to restricting noise. The turbo will reduce that so isn't such an
issue.
|
|
westy turbo
|
posted on 10/12/10 at 10:30 AM |
|
|
63mm or 2.5 inches is spot on,juts keep an eye on the EGT temps,you might need a 70mm down pipe.so will use the
28rs turbo?
|
|